MORRGARY logo MORRGARY Request a Quote

Home / Products

One kit per vehicle pattern — developed, tooled and in production

We do not sell universal mats. Every MORRGARY kit is developed from 3D scan data of one specific vehicle pattern, with a fit tolerance target of less than 0.5 mm. Below are all 17 patterns currently in production — plus how a kit is built.

Vehicle Patterns

17 patterns, factory-direct

New patterns are added continuously. If your vehicle is not listed yet, contact us — we may already be tooling it.

SKYNOMADN70 Specs & kit

A factory-direct floor kit developed specifically for the SKYNOMAD N70: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
SKYNOMAD N70 cabin with a MORRGARY wooden floor kit installed

Kit contents for the SKYNOMAD N70

ComponentDetails
Floor panelsMain walking surface for the SKYNOMAD N70, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the SKYNOMAD N70 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the SKYNOMAD N70 cabin kit.

Common questions

Is there a custom floor kit for the SKYNOMAD N70?
Yes. The SKYNOMAD N70 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original SKYNOMAD N70 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the SKYNOMAD N70 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the SKYNOMAD N70 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the SKYNOMAD N70 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the SKYNOMAD N70?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the SKYNOMAD N70 kit is finished in the same code.
Can you supply a right-hand-drive SKYNOMAD N70?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the SKYNOMAD N70 Choose a finish
SKYNOMADN70 Pro Specs & kit

A factory-direct floor kit developed specifically for the SKYNOMAD N70 Pro: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
SKYNOMAD N70 Pro cabin with a MORRGARY wooden floor kit installed

Kit contents for the SKYNOMAD N70 Pro

ComponentDetails
Floor panelsMain walking surface for the SKYNOMAD N70 Pro, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the SKYNOMAD N70 Pro original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the SKYNOMAD N70 Pro cabin kit.

Common questions

Is there a custom floor kit for the SKYNOMAD N70 Pro?
Yes. The SKYNOMAD N70 Pro is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original SKYNOMAD N70 Pro floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the SKYNOMAD N70 Pro kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the SKYNOMAD N70 Pro does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the SKYNOMAD N70 Pro kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the SKYNOMAD N70 Pro?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the SKYNOMAD N70 Pro kit is finished in the same code.
Can you supply a right-hand-drive SKYNOMAD N70 Pro?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the SKYNOMAD N70 Pro Choose a finish
SKYNOMADN90 Specs & kit

A factory-direct floor kit developed specifically for the SKYNOMAD N90: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
SKYNOMAD N90 cabin with a MORRGARY wooden floor kit installed

Kit contents for the SKYNOMAD N90

ComponentDetails
Floor panelsMain walking surface for the SKYNOMAD N90, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the SKYNOMAD N90 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the SKYNOMAD N90 cabin kit.

Common questions

Is there a custom floor kit for the SKYNOMAD N90?
Yes. The SKYNOMAD N90 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original SKYNOMAD N90 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the SKYNOMAD N90 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the SKYNOMAD N90 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the SKYNOMAD N90 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the SKYNOMAD N90?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the SKYNOMAD N90 kit is finished in the same code.
Can you supply a right-hand-drive SKYNOMAD N90?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the SKYNOMAD N90 Choose a finish
SKYNOMADN90 Max New Specs & kit

A factory-direct floor kit developed specifically for the SKYNOMAD N90 Max: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
SKYNOMAD N90 Max cabin with a MORRGARY wooden floor kit installed

Kit contents for the SKYNOMAD N90 Max

ComponentDetails
Floor panelsMain walking surface for the SKYNOMAD N90 Max, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the SKYNOMAD N90 Max original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the SKYNOMAD N90 Max cabin kit.

Common questions

Is there a custom floor kit for the SKYNOMAD N90 Max?
Yes. The SKYNOMAD N90 Max is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original SKYNOMAD N90 Max floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the SKYNOMAD N90 Max kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the SKYNOMAD N90 Max does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the SKYNOMAD N90 Max kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the SKYNOMAD N90 Max?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the SKYNOMAD N90 Max kit is finished in the same code.
Can you supply a right-hand-drive SKYNOMAD N90 Max?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the SKYNOMAD N90 Max Choose a finish
AITOM9 Most requested Specs & kit

A factory-direct floor kit developed specifically for the AITO M9: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
AITO M9 cabin with a MORRGARY wooden floor kit installed

Kit contents for the AITO M9

ComponentDetails
Floor panelsMain walking surface for the AITO M9, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the AITO M9 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the AITO M9 cabin kit.

Real AITO M9 installations

Cabin floor, oak — real AITO M9 installation by MORRGARY
Cabin floor, oaksecond row with illuminated panels
Trunk, full oak coverage — real AITO M9 installation by MORRGARY
Trunk, full oak coverageseat-back panels in the same finish code

Common questions

Is there a custom floor kit for the AITO M9?
Yes. The AITO M9 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original AITO M9 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the AITO M9 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the AITO M9 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the AITO M9 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the AITO M9?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the AITO M9 kit is finished in the same code.
Can you supply a right-hand-drive AITO M9?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the AITO M9 Choose a finish
AITOM8 Specs & kit

A factory-direct floor kit developed specifically for the AITO M8: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
AITO M8 cabin with a MORRGARY wooden floor kit installed

Kit contents for the AITO M8

ComponentDetails
Floor panelsMain walking surface for the AITO M8, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the AITO M8 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the AITO M8 cabin kit.

Common questions

Is there a custom floor kit for the AITO M8?
Yes. The AITO M8 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original AITO M8 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the AITO M8 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the AITO M8 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the AITO M8 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the AITO M8?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the AITO M8 kit is finished in the same code.
Can you supply a right-hand-drive AITO M8?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the AITO M8 Choose a finish
LUXEEDV9 Specs & kit

A factory-direct floor kit developed specifically for the LUXEED V9: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
LUXEED V9 cabin with a MORRGARY wooden floor kit installed

Kit contents for the LUXEED V9

ComponentDetails
Floor panelsMain walking surface for the LUXEED V9, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the LUXEED V9 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the LUXEED V9 cabin kit.

Real LUXEED V9 installations

Rear cabin, starry finish — real LUXEED V9 installation by MORRGARY
Rear cabin, starry finishfull floor with captain-seat aisle
Starry black with gold fleck — real LUXEED V9 installation by MORRGARY
Starry black with gold fleckilluminated door sills
Trunk, full coverage — real LUXEED V9 installation by MORRGARY
Trunk, full coverageone continuous floor to the tailgate

Common questions

Is there a custom floor kit for the LUXEED V9?
Yes. The LUXEED V9 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original LUXEED V9 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the LUXEED V9 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the LUXEED V9 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the LUXEED V9 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the LUXEED V9?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the LUXEED V9 kit is finished in the same code.
Can you supply a right-hand-drive LUXEED V9?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the LUXEED V9 Choose a finish
ZEEKR9X Specs & kit

A factory-direct floor kit developed specifically for the ZEEKR 9X: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
ZEEKR 9X cabin with a MORRGARY wooden floor kit installed

Kit contents for the ZEEKR 9X

ComponentDetails
Floor panelsMain walking surface for the ZEEKR 9X, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the ZEEKR 9X original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the ZEEKR 9X cabin kit.

Real ZEEKR 9X installations

Full cabin, marble grey — real ZEEKR 9X installation by MORRGARY
Full cabin, marble greyopen-door view of the complete floor
Trunk with seat-back panels — real ZEEKR 9X installation by MORRGARY
Trunk with seat-back panelssame finish code as the floor
Second-row footwell — real ZEEKR 9X installation by MORRGARY
Second-row footwellpanel edge follows the seat rail

Common questions

Is there a custom floor kit for the ZEEKR 9X?
Yes. The ZEEKR 9X is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original ZEEKR 9X floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the ZEEKR 9X kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the ZEEKR 9X does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the ZEEKR 9X kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the ZEEKR 9X?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the ZEEKR 9X kit is finished in the same code.
Can you supply a right-hand-drive ZEEKR 9X?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the ZEEKR 9X Choose a finish
ZEEKR009 Specs & kit

A factory-direct floor kit developed specifically for the ZEEKR 009: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
ZEEKR 009 cabin with a MORRGARY wooden floor kit installed

Kit contents for the ZEEKR 009

ComponentDetails
Floor panelsMain walking surface for the ZEEKR 009, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the ZEEKR 009 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the ZEEKR 009 cabin kit.

Common questions

Is there a custom floor kit for the ZEEKR 009?
Yes. The ZEEKR 009 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original ZEEKR 009 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the ZEEKR 009 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the ZEEKR 009 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the ZEEKR 009 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the ZEEKR 009?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the ZEEKR 009 kit is finished in the same code.
Can you supply a right-hand-drive ZEEKR 009?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the ZEEKR 009 Choose a finish
ZEEKR8X Specs & kit

A factory-direct floor kit developed specifically for the ZEEKR 8X: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
ZEEKR 8X cabin with a MORRGARY wooden floor kit installed

Kit contents for the ZEEKR 8X

ComponentDetails
Floor panelsMain walking surface for the ZEEKR 8X, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the ZEEKR 8X original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the ZEEKR 8X cabin kit.

Common questions

Is there a custom floor kit for the ZEEKR 8X?
Yes. The ZEEKR 8X is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original ZEEKR 8X floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the ZEEKR 8X kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the ZEEKR 8X does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the ZEEKR 8X kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the ZEEKR 8X?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the ZEEKR 8X kit is finished in the same code.
Can you supply a right-hand-drive ZEEKR 8X?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the ZEEKR 8X Choose a finish
NIOES8 Specs & kit

A factory-direct floor kit developed specifically for the NIO ES8: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
NIO ES8 cabin with a MORRGARY wooden floor kit installed

Kit contents for the NIO ES8

ComponentDetails
Floor panelsMain walking surface for the NIO ES8, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the NIO ES8 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the NIO ES8 cabin kit.

Common questions

Is there a custom floor kit for the NIO ES8?
Yes. The NIO ES8 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original NIO ES8 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the NIO ES8 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the NIO ES8 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the NIO ES8 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the NIO ES8?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the NIO ES8 kit is finished in the same code.
Can you supply a right-hand-drive NIO ES8?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the NIO ES8 Choose a finish
NIOES9 Specs & kit

A factory-direct floor kit developed specifically for the NIO ES9: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
NIO ES9 cabin with a MORRGARY wooden floor kit installed

Kit contents for the NIO ES9

ComponentDetails
Floor panelsMain walking surface for the NIO ES9, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the NIO ES9 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the NIO ES9 cabin kit.

Common questions

Is there a custom floor kit for the NIO ES9?
Yes. The NIO ES9 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original NIO ES9 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the NIO ES9 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the NIO ES9 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the NIO ES9 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the NIO ES9?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the NIO ES9 kit is finished in the same code.
Can you supply a right-hand-drive NIO ES9?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the NIO ES9 Choose a finish
LI AUTOL9 Specs & kit

A factory-direct floor kit developed specifically for the LI AUTO L9: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
LI AUTO L9 cabin with a MORRGARY wooden floor kit installed

Kit contents for the LI AUTO L9

ComponentDetails
Floor panelsMain walking surface for the LI AUTO L9, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the LI AUTO L9 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the LI AUTO L9 cabin kit.

Common questions

Is there a custom floor kit for the LI AUTO L9?
Yes. The LI AUTO L9 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original LI AUTO L9 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the LI AUTO L9 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the LI AUTO L9 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the LI AUTO L9 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the LI AUTO L9?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the LI AUTO L9 kit is finished in the same code.
Can you supply a right-hand-drive LI AUTO L9?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the LI AUTO L9 Choose a finish
LI AUTOi8 Specs & kit

A factory-direct floor kit developed specifically for the LI AUTO i8: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
LI AUTO i8 cabin with a MORRGARY wooden floor kit installed

Kit contents for the LI AUTO i8

ComponentDetails
Floor panelsMain walking surface for the LI AUTO i8, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the LI AUTO i8 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the LI AUTO i8 cabin kit.

Common questions

Is there a custom floor kit for the LI AUTO i8?
Yes. The LI AUTO i8 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original LI AUTO i8 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the LI AUTO i8 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the LI AUTO i8 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the LI AUTO i8 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the LI AUTO i8?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the LI AUTO i8 kit is finished in the same code.
Can you supply a right-hand-drive LI AUTO i8?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the LI AUTO i8 Choose a finish
LEAPMOTORD19 Specs & kit

A factory-direct floor kit developed specifically for the LEAPMOTOR D19: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
LEAPMOTOR D19 cabin with a MORRGARY wooden floor kit installed

Kit contents for the LEAPMOTOR D19

ComponentDetails
Floor panelsMain walking surface for the LEAPMOTOR D19, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the LEAPMOTOR D19 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the LEAPMOTOR D19 cabin kit.

Common questions

Is there a custom floor kit for the LEAPMOTOR D19?
Yes. The LEAPMOTOR D19 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original LEAPMOTOR D19 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the LEAPMOTOR D19 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the LEAPMOTOR D19 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the LEAPMOTOR D19 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the LEAPMOTOR D19?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the LEAPMOTOR D19 kit is finished in the same code.
Can you supply a right-hand-drive LEAPMOTOR D19?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the LEAPMOTOR D19 Choose a finish
VOYAHTaishan X8 Specs & kit

A factory-direct floor kit developed specifically for the VOYAH Taishan X8: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
VOYAH Taishan X8 cabin with a MORRGARY wooden floor kit installed

Kit contents for the VOYAH Taishan X8

ComponentDetails
Floor panelsMain walking surface for the VOYAH Taishan X8, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the VOYAH Taishan X8 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the VOYAH Taishan X8 cabin kit.

Common questions

Is there a custom floor kit for the VOYAH Taishan X8?
Yes. The VOYAH Taishan X8 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original VOYAH Taishan X8 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the VOYAH Taishan X8 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the VOYAH Taishan X8 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the VOYAH Taishan X8 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the VOYAH Taishan X8?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the VOYAH Taishan X8 kit is finished in the same code.
Can you supply a right-hand-drive VOYAH Taishan X8?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the VOYAH Taishan X8 Choose a finish
IMLS8 Specs & kit

A factory-direct floor kit developed specifically for the IM LS8: a genuine 6–7 mm solid wood core between aluminium sheets, laid over a hidden track — no removal of the original floor, no drilling, no visible hardware.

  • < 0.5 mmFit tolerance target, from 3D scan data
  • ≤ 7 mmTotal panel thickness
  • 6–7 mmGenuine solid wood core
  • 16,000Revolutions wear rating (Diamond-Rock surface)
IM LS8 cabin with a MORRGARY wooden floor kit installed

Kit contents for the IM LS8

ComponentDetails
Floor panelsMain walking surface for the IM LS8, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats developed from the IM LS8 original floor scan.
Transition bridgeCovers joints at door sills and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track on the panel underside.
Trunk floor panelOptional cargo floor in the same finish as the IM LS8 cabin kit.

Common questions

Is there a custom floor kit for the IM LS8?
Yes. The IM LS8 is one of MORRGARY's 17 developed vehicle patterns. The kit is developed from 3D scan data of the original IM LS8 floor, with a fit tolerance target of less than 0.5 mm, and is in production — not a concept or a waiting list.
How is the IM LS8 kit installed?
With the fourth-generation integrated hidden track mounted on the panel underside. Installation on the IM LS8 does not require removing the original floor or drilling into the body. Panels are aligned and laid in place, so the original interior stays intact — see the structure and installation guide for the full sequence.
Will the IM LS8 kit rattle or come loose?
The one-piece aluminum track integrates the mounting points into the panel design and reduces loose fittings by around 40% versus conventional track systems — fewer separate clips means fewer parts that can work loose or make noise.
Which finishes can I choose for the IM LS8?
Any of the 560 coded finishes in our library — marble, natural wood, parquet, starry, chinoiserie and fabric series — plus custom finishes based on a physical sample. Every component in the IM LS8 kit is finished in the same code.
Can you supply a right-hand-drive IM LS8?
Right-hand-drive builds are made to order. Send us the model, the market and the steering configuration — we confirm tooling availability and lead time before quoting.
Request a quote for the IM LS8 Choose a finish

Tap a model to open its specs, kit contents and own questions — no page change. Right-hand-drive builds are available to order; tell us the model and market.

What Is in a Kit

Up to seven components, one finish code

Each kit is configured per vehicle pattern, and every component is finished in the same coded finish from our library of 560 finishes across 6 series.

ComponentDescription
Floor panelsThe main walking surface, aluminium–wood–aluminium with a genuine 6–7 mm solid wood core.
Floor matsPattern-matched mats that follow the original vehicle floor contours.
Transition bridgeCovers the joint between panels and original interior at door and seat rails.
FootrestCustom-shaped footrest matched to the pattern and finish.
Welcome sillMetal-look sill trims aligned with the panel edges.
Hidden aluminum trackFourth-generation integrated track mounted on the panel underside.
Trunk floor panelOptional rear cargo floor in the same finish.

Craft

How the panel is built

Hot-pressed aluminium–wood–aluminium construction, a Diamond-Rock pressed wear surface rated to 16,000 revolutions, and an integrated hidden track on the panel underside — all produced in-house in our own plant.

Full craft breakdown

Cross-section of the panel showing the genuine solid wood core between aluminium sheets

Not sure whether your model is covered?

Send us the model and market — we will confirm the pattern status and quote your configuration.

Ask about your model